manualshive.com logo in svg

FLIR PT series, Installation Manual

Share
Download
FLIR PT series Installation Manual Download Page 5

427-0032-00-12, Version 170

Mar 2014

1-1

1

PT-Series Camera Installation

This manual describes the installation of the PT-Series cameras. If you need help during the installation 

process, please call to speak with our support experts (877-773-3547). All installers and integrators are 

encouraged to take advantage of the training offered by FLIR; visit

 http://www.flir.com/training for more information.

This manual includes the following topics: 

•

Installation Overview

•

Mounting the camera and its components 

•

Connecting the electronics

•

Bench testing the camera

•

Basic configuration and operation of the camera

•

Camera Specifications

For safety, and to achieve the highest levels of performance from the PT-Series camera system, always 

follow the warnings and cautions in this manual when handling and operating the camera system.

1.1

Warnings and Cautions

Warning!

Caution!

1.2

References

PT-SERIES Camera Mechanical Interface Control Document (ICD) 

(FLIR Doc # 427-0032-00-19)

•

Available on the documentation CD or from the FLIR website, provides further details regarding 

mechanical dimensions and mounting for the PT-Series camera. 

Nexus IP Camera Configuration Guide 

(FLIR Doc # 427-0030-00-28) 

•

Available on the documentation CD or from the FLIR website, provides further details on using a web 

browser to configure the PT-Series camera. 

1.3

Camera Overview

If mounting the PT-Series camera on a pole, tower or any elevated location, use industry standard 

safe practices to avoid injuries.

Except as described in this manual, do not open the PT-Series camera for any reason. Disassembly 

of the camera (including removal of the cover) can cause permanent damage and will void the 

warranty.
Be careful not to leave fingerprints on the PT-Series camera’s infrared optics.
The PT-Series camera requires a power supply of 24 Volts. Operating the camera outside of the 

specified input voltage range or the specified operating temperature range can cause permanent 

damage.

Summary of Contents for PT series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands