FLIR PathFindIR LE, User Manual

Page: 25 / 36

334-0001-00-10-LE, rev. 100 May ’08 19
7
7 Installation
7.1 PathFindIR LE Installation
The PathFindIR LE is a compact, sealed imaging system that fits easily
behind vehicle grilles and in other compact locations. It includes an
internal heater to keep the lens clear in icy conditions, and delivers
superior image quality. It can be ordered as a camera module with a
commercial grade cable.
The PathFindIR LE must be mounted in a location where it is not
obstructed by the windshield or other glass materials. Although glass is
transparent to the human eye, it is opaque in the infrared spectrum.
The PathFindIR LE should be installed by an installer or dealer trained by
FLIR Systems, Inc. If one is not available in your area we recommend that
you use a reputable car audio/video installation shop that specializes in
mobile video system integration. The wiring and installation requires
special care and integration techniques. Improper installation may result
in damage to the camera and may void the warranty.
Some modifications to the vehicle’s exterior may be required, as well as
integration into various display units, including factory LCD or aftermarket
multi-functional display units.
7.2 Preparation
The PathFindIR LE Standard 20 foot system cable has two open power
leads to be connected to a power source operating between 6V - 16V. The
standard cable accessory also includes a BNC male end. Refer to the
model number for your specific analog video output format.
It is recommended that power to the monitor be supplied separately from
power to the PathFindIR LE unit to assure clean (low noise) power to both
items. Otherwise the video image may appear to have interference,
ghosting, or undesirable video artifacts.
Caution: Before wiring the camera, disconnect all power from the
battery. Failure to do so may result in shock, bodily harm, or damage to
system.