background image

8 – Infrared Technology

24

May ’08

334-0001-00-10-LE, rev. 100

8 – Infrared Technology

As the blackened thermometer was moved slowly along the colors of the 
spectrum, the temperature readings showed a steady increase from the 
violet end to the red end. This was not entirely unexpected, since the 
Italian researcher, Landriani, in a similar experiment in 1777 had 
observed much the same effect. It was Herschel, however, who was the 
first to recognize that there must be a point where the heating effect 
reaches a maximum, and those measurements confined to the visible 
portion of the spectrum failed to locate this point. 

Figure 8-2: Marsilio Landriani (1746–1815)

Moving the thermometer into the dark region beyond the red end of the 
spectrum, Herschel confirmed that the heating continued to increase. The 
maximum point, when he found it, lay well beyond the red end—in what is 
known today as the ‘infrared wavelengths’.

When Herschel revealed his discovery, he referred to this new portion of 
the electromagnetic spectrum as the ‘thermometrical spectrum’. The 
radiation itself he sometimes referred to as ‘dark heat’, or simply ‘the 
invisible rays’. Ironically, and contrary to popular opinion, it wasn't 
Herschel who originated the term ‘infrared’. The word only began to appear 
in print around 75 years later, and it is still unclear who should receive 
credit as the originator.

Herschel’s use of glass in the prism of his original experiment led to some 
early controversies with his contemporaries about the actual existence of 
the infrared wavelengths. Different investigators, in attempting to confirm 
his work, used various types of glass indiscriminately, having different 
transparencies in the infrared. Through his later experiments, Herschel 
was aware of the limited transparency of glass to the newly-discovered 
thermal radiation, and he was forced to conclude that optics for the 
infrared would probably be doomed to the use of reflective elements 
exclusively (i.e. plane and curved mirrors). Fortunately, this proved to be 

Summary of Contents for PathFindIR LE





































Reviews: