FLIR mariner, Operator'S Manual

Page: 21 / 48

427-0010-00-10, version 120 11/06 15
4
4 Caring for your new ThermoVision
®
Mariner
4.1 Troubleshooting
If the camera will not produce an image or will not respond to JCU inputs,
check the fuses in the JCU by removing the fuse covers. If either or both of
the fuses have blown, replace them with 2 Ampere fuses.
If the JCU does not turn on when the power switch is turned on, check the
wiring at both the electrical panel and at the termination to the JCU.
Ensure that the contacts are clean dry and free from corrosion. If
maintenance on the wiring connection is required, have an authorized
service representative make the appropriate repairs.
If the camera will not produce an image, check the video connection at the
camera and at your display. If the connectors appear to be properly
engaged but the camera still does not produce an image, have an
authorized service representative make the appropriate repairs.
Caution! Do not open the camera body for any reason. Disassembly of the
camera (including removal of the cover) can cause permanent damage
and will void the warranty.