FLIR mariner, Operator'S Manual

Page: 12 / 48

3 – Getting Started
6 11/06 427-0010-00-10, version 120
3.2 Operational Overview
The ThermoVision
®
Mariner is easy to install and operate. The system
operates on 12 volts DC, and the joystick control for panning and tilting
the camera is very intuitive; there are no camera adjustments. The thermal
imaging camera inside the ThermoVision
®
Mariner is completely sealed
and extremely rugged. The camera has been qualified for operation in all
types of weather conditions over the specified operating temperature range
and includes an automatic window heater that will prevent icing under
most conditions.
Figure 3-2: Schematic of Standard Configuration
Mariner Camera
Monitor
Joystick Control
3/16
″
and 1/4
″
spade
18 GA power wires
8’ cable
BNC connector
±12 Vdc, 20W
75 ohm cable
(supplied)
(not supplied)
with Pan/Tilt (supplied)
(not supplied)
crimp connectors
(supplied)
(not supplied)
(included)