Setup
5
To configure general camera settings:
1. Under
Device Name
, enter a name for the camera.
2. Under
Language
, select the language that will be used for the web browser interface.
3. Under
Video Standard
, select
NTSC
(North America) or
PAL
(Europe).
4. Click
Save
.
5.6.2
Date & Time
The Date & Time tab allows you to set up date and time settings for the IP camera.
To configure date & time settings:
1. Configure the following:
•
Date Format:
Select the date format.
•
Time Format:
Select the time format (12 hour or 24 hour).
•
Time Zone:
Select your time zone.
•
Current Time:
Enter the current time or click
Sync PC
to sync your IP camera to
your PC’s clock.
2. If your area uses Daylight Savings Time (DST) check
DST Enable
. If you enable DST,
configure the following:
•
DST Type:
Select
Date
to select a date for the time change or select
Week
to select
the week and day for the time change.
•
Start Time
and
End Time:
Enter the start and end times for Daylight Savings.
3. Check
Synchronize with NTP
to synchronize the camera clock with an NTP time
server. A constant Internet connection is required to use NTP. If you enable NTP, con-
figure the following:
•
NTP Server:
Enter the NTP server address.
•
Port:
Enter the port for the NTP server.
•
Update Period:
Enter the interval the camera will use to update the time.
#LX400038; r. 1.0/18537/18537; en-US
47
Summary of Contents for IP Series
