10
FLIR
BREACH
U S E R M A N U A L
3.1.2.4 USER-CONTROLLED MANUAL NON-
UNIFORMITY CORRECTION/FLAT-FIELD
CORRECTION (UCMNUC/FFC)
Use UCMNUC/FFC (User-Controlled Manual Non-Uniformity Correction/
Flat-Field Correction) function to improve image quality. As the camera
changes temperature, its pixels may drift due to internal and external
temperature change. The pixels do not drift uniformly. The camera
software compensates for the drift up to an accurate position point.
The UCMNUC/FFC function is triggered when the limit is reached.
A uniform mechanical shutter is placed between the lens and the
detector for a moment, and the signal is processed.
Push the two control buttons
▲
and
▼
at the same time to manually
trigger a User-Controlled Manual Non-Uniformity Correction/Flat-Field
Correction.
If necessary, interrupt the automatic UCMNUC/FFC process by
pushing the central
●
button on the control panel during the 5 second
countdown which appears at the bottom of the display. The shutter will
not interrupt viewing.
3.1.2.5 SNAPSHOT
The snapshot function is used to capture images and to record video.
Up to 1,000 pictures and up to 2.5 hours of recorded video can be
stored in the camera’s internal memory at one time.
TAKING A PICTURE
Click
●
button to capture a single image. Image Capture # will appear
in the middle of the display
RECORDING VIDEO
Double click
●
button to begin video recording and double click again
to stop recording.
3.1.2.6 MAIN MENU
When the monocular is turned on pushing and holding
●
button will
bring up the Main Menu selection.
Use
▲/▼
buttons to navigate through the items on the menu.
Push the
●
button to view the settings available for the item selected.
3.2 USING USB-C CONNECTOR
Remove the connector protective cap. Connect USB-C cable.
To view video using the USB-C, connect the cable to a USB input of a
computer. Then it can be viewed like an external webcam.
To read/copy/delete files on the internal memory of Breach, operate it
like any external mass storage device connected by an USB cable.
To power the Breach from an external source plug the cable into any
standard USB power source.
