FLIR 72501-0101, User Manual

Page: 66 / 146

Saving and working with images 14
focus, a high-contrast scene, and a non-moving target are other conditions that help to
achieve a good-quality UltraMax image.
Some FLIR Thermography software has the ability to process UltraMax images. Other
FLIR software will treat the image as a regular image.
To configure the camera for UltraMax, select ( Settings ) > Save options & storage >
Image resolution = UltraMax .
14.2 Saving an image
14.2.1 General
You can save images to the memory card.
14.2.2 Procedure
Follow this procedure:
1. To save an image, push the Save button fully down.
Note Depending on the settings in ( Settings ) > Save options & storage , the follow-
ing may happen:
• A preview image is displayed before the image is saved.
• An annotation tool or the annotation menu is displayed when the image has been
saved.
14.3 Previewing an image
14.3.1 General
You can preview an image before you save it. This enables you to see if the image con-
tains the information you want before you save it. You can also adjust and edit the image.
Note The camera must be configured to display a preview image before saving. Select
( Settings ) > Save options & storage > Preview image before saving = On .
14.3.2 Procedure
Follow this procedure:
1. To preview an image, push the Save button fully down. This displays the preview.
2. Manual image adjustment mode is now active. For image adjustment instructions,
see section 16.3 Adjusting the infrared image , page 60.
3. To edit the image, push the joystick. This displays a context menu. For editing instruc-
tions, see section 14.5 Editing a saved image , page 53.
4. Do one of the following:
• To save the image, push the Save button fully down.
• To exit preview mode without saving, push the back button .
14.4 Opening a saved image
14.4.1 General
When you save an image, the image file is stored on the memory card. To display the im-
age again, open it from the image archive (
Gallery ).
#T559954; r. AT/65353/65353; en-US 52