manualshive.com logo in svg

FLIR 432-0012-04-00, Operator'S Manual

Share
Download
FLIR 432-0012-04-00 Operator'S Manual Download Page 9

 System Description

432-0012-00-10 Version 110

June  2016

9

System Description

The multi-sensor M400 is a stabilized maritime thermal and high definition (HD) visible-light 
camera system for use on most types of vessels. The long wave infrared (LWIR) thermal camera 
provides excellent nighttime visibility and situational awareness, without any form of natural or 
artificial illumination. The HD visible-light camera with 30X optical zoom provides daytime viewing.

Standard Features

• Thermal camera, 4x continuous optical zoom

• HD visible-light camera, 30x continuous optical zoom

• High intensity LED spotlight

• Active gyro-stabilization

• Radar integration to follow specific radar targets (NMEA 0183 serial communications)

• Dual, independent H.264 network video streams

• HD-SDI (Serial data interface)

• Analog video

The thermal camera, HD visible-light camera, and spotlight are aligned to view or illuminate a 
target for quick identification providing enhanced navigational abilities in a variety of conditions.

Figure 1-1: M400 Pan/Tilt Camera System

LED spotlight

Thermal camera

HD visible-light camera 

Joystick Control Unit
(JCU II)

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 432-0012-04-00












































Reviews:

No comments

Brands by name

Popular brands

Load more brands