FLIR 00723193774298, Installation & Operation Instructions

Page: 25 / 124

4.4 Cable ferrite installation
Your product is supplied with a cable ferrite. To
ensure EMC Compliance, the supplied ferrite must
be fitted to the cable according to the following
instructions.
S
ea
Ta
lk
ng
50 mm (1.97 in) - 100 mm (3.94 in)
SeaT alkng
Device
D13539-1
1. The ferrite must be fitted to the end of the cable
closest to the device.
2. The ferrite must be fitted at the distance specified
in the illustration above.
3. Ensure a tight and secure fit so that the ferrite will
not move up or down the cable.
4.5 SeaTalk ng® connection
The unit connects as part of a SeaTalk ng network.
Example: SeaTalk ng®® system with Evolution
autopilot and iTC-5
12 V dc
0 0
SeaT alk
ng
SeaTalk
ng
D13026-2
7
1 3 2
4 5
6
8
9 1 0 1 1
1 ACU unit
2 i70s Multifunction instrument display
3 p70s / p70Rs Pilot controller (p70s shown)
4 Vessel’s 12 V dc power supply
5 EV unit
6 SeaTalk ng 5–way connector
7
Rudder reference transducer
8 iTC-5 converter
9 Depth transducer
10 Wind transducer
11 Speed transducer
Note: In the above example if an ACU-100 were
used, the SeaTalk ng network would require a
dedicated 12 V dc power supply because the
ACU-100 does not supply power to the SeaTalk ng
network.
Cables and connections 25