Flipper Instructions
A22v2.NA & EU
(North America & EU)
5
Switching Between Favorites and Regular:
Press and hold
ADD
and
Dash “-“
at the same time until the light flashes twice and turns
off.
Step 4: Dual Mode
In Dual Mode,
On/Off
works both the TV and STB;
Channel Up/Down
and the
0-9
keypad works the STB; and
Volume
works the TV. For best operation, make sure that the
TV and STB are in close proximity to one another.
1.
To Enter “Dual Mode,” press and release
ADD
. The light will flash once.
2.
To Exit Dual Mode, press either STB or TV, depending on which device you want
to control.
TV Only On/Off:
You may wish to keep the STB on all the time to avoid the possibility that one device
will turn on while the other device stays off.
Press and hold
ADD
until the light turns solid, then enter 999.
To return to Dual on/off, press and hold
ADD
until the light turns solid, and enter 998.
Step 5: Lock the Remote Control
Locking Flipper deactivates the set up buttons to avoid reprogramming by accident. If you
do not want to lock, set-up is complete.
Dual Mode
:
1.
Lock: Press and hold
ADD
until the light turns solid, then enter 955. The light
blinks out.
2.
Unlock: Press and hold
ADD
until the light turns solid, then enter 956. The light
blinks out.
TV Only Mode
:
Use
TV
instead of
ADD
.
Other Set-up Options
There may be instances where your device is not in the code list, or you prefer to search for
a code rather then enter it manually.
Automatic Code Search
Start with the TV and STB on. Code search sends codes from the database to your TV or
STB to search for a match. When the device turns off, a match is found.
