Flipper Instructions
A22v2.NA & EU
(North America & EU)
3
2.
Press and hold TV until the light turns turn solid.
3.
Enter the first code for your device. If the code was entered correctly, the light
turns off.
4.
Test On/Off and Volume.
5.
If Flipper works the TV, then go to Step 2 to set STB.
6.
If Flipper does not work the TV, try the next code. It may take several codes to
find one that works.
Note:
If you are unable to find a working code, see Other Set Up Options.
Note:
If the red light does not flash as it should, please see Troubleshooting.
Step 2: STB
If using Flipper as TV only, skip STB set up.
Flipper is pre-set to most Motorola STBs. To test, press and release STB once, and check
the Channel function. If your device works, go to the next Step. If not, continue:
1.
Locate the 4-digit code for your STB in the STB code list. Codes are usually listed
by device brand, not cable provider.
2.
Press and hold STB until the light turns solid.
3.
Enter the first code for your device. If the code was entered correctly, the light
turns off.
4.
Test the Channel.
If Flipper works the STB, then continue to the next step.
5.
If Flipper does not work the STB, try the next code. It may take several codes to
find one that works.
Note:
If you are unable to find a working code, see Other Set Up Options.
Note:
If the red light does not flash as it should, please see Troubleshooting.
Step 3: Favorite Channel Set Up
Flipper will either scroll through all available channels, or you can program in up to 25
Favorites. If you do not want to set up a Favorites list, go to Step 4.
In Favorite Channel Mode,
Channel Up/Down
scrolls through your Favorites; the 0-9
buttons work as normal.
Note:
When advancing through favorites, let the channel change before pressing the
button again.
