MAN_DZ4_002 Rev 22.0 Flightcell
©
DZMx & DZMx Plus Operator Manual
Page 35 of 43
Effective Date: 28 Jun 2021
1.
Using the keypad press and hold the EMER key until the DZMx makes an audible beep.
2.
Emergency Mode will no longer be displayed on the DZMx screen.
3.
The DZMx will transmit a message that emergency mode has been terminated.
Alert Mode
The DZMx allows users to activate an "Alert" mode event that says something is wrong with the
flight or the mission. It is not as severe as the emergency mode.
The Alert mode can be configured by the Installer using the DZMx Connect app.
Activating Alert Mode
Alert messages may be sent from the DZMx in an emergency. Your tracking provider will have a
system for raising an alert or alarm when an alert message is received.
To send an alert message:
1.
Press and hold the A.R.M. key until the DZMx beeps and flashes Alert Queued!
2.
A tracking message will be added to the front of the outgoing message queue.
3.
Alert messages will continue to be sent at pre-programmed intervals (usually set at minute)
until the Alert mode is terminated.
To terminate Alert mode:
1.
Press and hold the A.R.M. key until the DZMx beeps.
2.
The DZMx will NOT transmit a message that the Alert mode has been terminated.
Cellular Flightmode
The cellular modem can be set to Flightmode so that it does not transmit or operate in-flight.
When Flightmode is enabled, the modem is put into a low-power state and cannot be used for
incoming or outgoing calls, tracking, SMS or data.
Flightmode
To turn Flightmode on or off:
1.
Press and hold the modem button, A or B for the DZMx cell connection.
2.
Flightmode on: a status message will show saying Disabled.
3.
Flightmode off: a status message will show Searching, until a good signal is obtained.
Note
:
A.R.M. and Alert mode cannot be enabled at the same time.
Summary of Contents for DZMx
Page 42: ......
