Installation / Operation Manual
anemoi
02.04.2022 | V1.02
-27-
6.7
Firmware / Software Update
The
anemoi
allows for easy conduction of software updates through the microSD interface. The
software is delivered in compressed .zip-files with the following exemplary structure:
fw_anemoi_sensor_v1.0.zip
->
sensor.bin
fw_anemoi_display_v1.0.zip
->
display.bin
The binary software upgrade files (.bin) have to be copied on a microSD. The microSD card has to be
placed inside the microSD card slot. To update the sensor unit, the microSD card with the
sensor.bin
file has to be placed inside the senor unit. To update the display unit, the microSD card with the
display.bin
file has to be placed inside the display unit.
The binary file is recognized by the
anemoi
when power is applied, and the device boots up. When an
update file is detected, the content is automatically programmed into flash memory and the device
starts up using the new software. Upon successful firmware update, the binary file is deleted from the
microSD. If you need to do another firmware update, you have to follow the same procedure as above.
Please ensure every step before flashing.
•
Use a microSD card with max. 32 GB
•
Make sure to format the microSD card in FAT32 format (exFAT/NTFS is not supported!)
•
Ensure the microSD card is empty
•
Download the latest firmware from following RS Flight Systems website
•
Do not rename the firmware file
Flashing mechanism sensor unit:
•
Power off the
anemoi
sensor unit
•
Copy the downloaded binary file:
sensor.bin
in the root directory of the microSD card
•
Insert the microSD card in the sensor unit
•
Power on the
anemoi
sensor unit
Flashing mechanism display unit:
•
Power off the
anemoi
sensor unit
•
Copy the downloaded binary file:
display.bin
in the root directory of the microSD card
•
Insert the microSD card in the display unit
•
Power on the
anemoi
sensor unit
The new firmware version is displayed on the startup screen.
