9
Clave 23+ Instruction Manual v1.4
5.3.7 Select the program. You will see the available sterilization programs: Press
SELECT button, enter menu then select the ‘Program’.
Select the program by
button and confirm it by pressing SELECT. If you don’t want
to select a program, you may press START to exit.
Notice:
All buttons will be locked for the initial 10 seconds after powering up for system
initialization.
5.4 Running the Sterilization Program.
After selecting the program, the materials to be
sterilized can now be placed on the tray and
placed inside the chamber using the tray handle.
5.4.1 After the instruments are loaded, you may
close and lock the door by turning the door handle clockwise until it stops.
Caution:
You must turn the door handle to the maximum position, otherwise the alarm
On the machine will sound and prevent the cycle from starting.
5.4.2 Starting the sterilization program
Press the Start button on the machine and it will start the cycle automatically. It will take
30 ~ 75 minutes (see appendix 2).
Total time or count down until completion
Caution:
When you press the Start button but the door has not been fully closed, you will see the
blinking on the screen. A cycle cannot be started until you close the door completely.
Once the door is completely closed, press the Start button again.
