Fliegl Noah TTW, Operating Instructions Manual

Page: 52 / 68

TTW Noah livestock trailer Service and maintenance
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
50 of 69
9.5 Troubleshooting and fault elimination
Special caution when rectifying faults.
- Consult trained service personnel or visit a specialist workshop.
- If necessary, contact the manufacturer's customer service department.
9.5.1 List of warning and fault signals
Fault / error message Possible cause(s) Remedy
Parking brake Braking effect too low Identify the cause of lacking brake force
Adjust the cable pull or
Visit a specialist workshop
Lighting faulty No lighting
Fuse tripped
Defective cable
Bulb failure Check and establish the power supply
Visit a specialist workshop
Identify the cause of the tripped fuse
Rectify the error and replace the fuse
Open the bulb housing
Replace the faulty bulb with a bulb of the
same rating; perform a function check
Close the bulb housing
Hydraulic cylinders move too
slowly or not at all Insufficient oil in the hydraulic
system
Hydraulic coupling connected
incorrectly
Hydraulic coupling faulty
Insufficient oil flow Check the oil level and top up if
necessary
Check the connections
Check the coupling and replace if
necessary
Check the tractor hydraulics
Hydraulic cylinders extend but
then do not retract The piston seal in the cylinder is
faulty, meaning that the piston
and ring face are in direct
contact Check the cylinders individually for leaks
and replace the faulty cylinder if
necessary
Low lift and break-out forces Insufficient oil pressure Check the tractor hydraulics
Maintenance, repairs and conversion work on the TTW must be performed
only when hydraulic operation is switched off.
Secure the tractor to prevent accidental start-up and rolling away.