pg. 46 Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
The Monitor, Counters window is divided into the following sections:
System Counters, Downlink
System Counters, Uplink
Station Counters
Control Buttons
The following table describes the Monitor, Counters Window:
Table 12: MWB1305 Configuration – Counters Parameters
Parameter
Description
System Counters, Downlink
Frames
Total – The total number of frames transmitted.
pps – Packets per second transmitted.
bps – Bits per second transmitted.
Age Dropped Frames
Total – The total number of frames dropped because of lifetime expiration.
pps – Packets per second dropped because of lifetime expiration.
Filtered Frames
Total – The total number of frames dropped because the destination was not
an associated MWS1000.
pps – Packets per second dropped because the destination was not an
associated MWS1000.
Air Interface Total
The total number of frames transmitted over the air.
PER
The percentage of failed frame transmissions.
System Counters, Uplink
Frames
Total – The total number of frames received.
pps – Packets per second received.
Filtered Frames
Total – The total number of frames dropped because the source was not an
associated MWS1000.
pps – Packets per second dropped because the source was not an associated
MWS1000.
CRC Errors
Total – The total number of received frames with bad CRC .
pps – Packets per second received with bad CRC.
Station Counters
MAC Address
The MWS1000 MAC Address.
Type
The MWS1000 type – Possible values: Data or VIDEO.
Status
The MWS1000 status – Possible values: Associated, Disassociated,
Authenticated, Disauthenticated.