pg. 34 Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
The following table describes the parameters you can configure from this window:
Table 8: MWB1305 Configuration – QoS Parameters
Parameter
Description
Enhanced Mode
When checked, the system works in burst scheduling mode,
increasing system capacity. If cleared, the Block Ack Mode is
inactive and grayed out.
Block Ack Mode
When checked, the system works in 802.11e Block Ack Mode,
further increasing system capacity.
Allowed Station
When checked, only the MWS1000s listed in the Station QoS
Properties table are allowed to communicate with the
MWB1305. When cleared, any MWS1000 can communicate
with the MWB1305.
Station
The number of the MWS1000 communicating with the
MWB1305.
MAC Address
The MAC address of the MWS1000 communicating with the
MWB1305.
Type
The type of data transported to the MWS1000. Possible values:
Data, Video.
Note:
The new settings will take effect after restarting the system.
2.
Click
Apply
to update the settings offline. The system stores the new settings and
prompts you to restart the system.
3.
Click
YES
and wait several seconds for the system to restart.
