Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service pg. 17
Pairing your Devices
Note:
Consult with the quick installation guide that came with your kit to check if the
devices in your kit are already paired, in which case you can skip this step. .
1.
Place the MWB1305 Access Point and the MWS1000 Client devices between 1 to 3
meters from each other.
2.
Pair the devices by pressing the WPS button on the MWB1305 and MWS1000 rear panel
for 5 seconds. You can release the button as soon as the WLAN LED begins flashing.
Figure 7 - Pairing the devices
Note:
The WPS buttons should be pressed within 2 minutes period. The buttons can be
pressed in any order.
3.
Wait for the pairing process to complete by watching the LEDs on the devices:
While pairing is in progress the WLAN LED is flashing green
After successful pairing the Link Quality LED is flashing green for 30 seconds.
Pairing is in progress Pairing has finished successfully
