FlexPro EEH/18, User Manual, Page: 9 / 16

P 9 /Total14
◆
When group 1 ON timer flashing, press “clock” button, enter group 1
ON timer “hour” setting interface, “hour” flash, then press
“+”or“-”button ，
then can set “hour” for group 1 ON timer.
◆
After finish setting “hour”, press “clock” button, then “minute” flash,
then press “+”or“-”button
，
can set “minute” for group 1 timer.
◆
After finish setting group 1 ON timer “minute”, press “clock” button,
enter group 1 OFF timer setting, same way like ON timer setting..
◆
After finish setting group 1 ON/OFF timer, press “clock” button,
confirm group 1 setting, and enter group 2 ON/OFF timer setting, same
way like group 1 setting.
◆
At timer interface, if there is not operation within 30seconds, then
confirm current timer setting, and back to main interface (this setting
can be remembered if electricity is cut off)
◆
At timer interface, press “clock” button, confirm current timer
setting, and back to main interface.
◆
Other groups ON/OFF timer setting are same way like group1.
◆
How to cancel timer?
At timer interface, press “clock” button for 5seconds, when the ON and
OFF signal disappear, then press “power” button to confirm, can cancel
current group ON/OFF timer.
③
Lock keys and unlock keys
◆
At locking state, press “power” button for 3seconds, buzzer will give
a voice of “Di”, keys will be locked.
◆
If there is not operation within 60seconds constantly, will lock keys
automatically.