FlexPro EEH/18, User Manual, Page: 8 / 16

P 8 /Total14
is allowed to start
L6 Reserved
L7 Reserved
L8 Compressor current
0
～
40A
0
（
0:
will not
detect
current
）
L9
Reserved
3.2 Other operation
①
Clock setting
◆
At main interface, press “clock” button for 5 seconds, enter clock
setting interface
◆
At clock interface, press “clock” button, then “hour” flash, press
“+”or “-”button
，
can set hour.
◆
After finish setting hour, press “clock” button, then “minute” flash,
now press “+”or“-”button
，
can set minute.
◆
After finish setting minute, press “clock” button, to confirm clock
setting, and back to main interface.
◆
At clock setting interface, if there is not operation within 30seconds,
system will confirm clock setting and back to main interface
automatically.
◆
At clock setting interface, press “power” button, can confirm current
clock setting and back to main interface.
②
Timer setting and cancelling (ON/OFF timer)
◆
At main interface, press “clock” button, enter timer group setting.
Now press “+” or“-”button, can switch timer groups, there are 3 groups
ON/OFF timer.