FlexoTrim LSN 2600 E, Operating Instructions Manual

Page: 23 / 84

OPERATING RANGE
This Blower/Vacuum device must only be used to blow
away or vacuum dry and light materials as e.g. dry
leaves, small branches, and pieces of paper. The vacu-
uming of heavy materials as e.g. metal, stones, big
branches and broken glass is expressively excluded.
BEFORE OPERATION
Unpacking
1. Take all parts out of the packaging.
2. Check all parts for transportation damages. If you
detect any damages or if parts are missing, please
contact your dealer.
Assembly
Attention ! Always pull the plug and switch the
device OFF, before you assemble the device or
replace parts.
Blowing
1. Align the grooves on the blower tube with the grooves
on the blower outlet. Push the blower tube onto the
blower outlet until it locates in the right position (Fig. A).
2. Fix the adjustable shoulder harness on the top han-
dle, put the blower on (Fig. B1).
3. Assembly the power cord according to the picture
C1,C2
Operating instruction
1. Get though the power, move the power off/on switch
to the ON position (Fig. D)
2. Adjust speed control and the speed is moderate
(Fig. E)
3. Direct the blow tube toward the leaves (Fig. F)
Stopping the Vacuum- Blower
To turn off the machine you can simply release the switch.
Vacuum mode
1. Press the button of the blower tube downward, draw
the tube out of housing (Fig. G1/G2/G3)
2. Clear the tube outlet by using the brush to protect the
tube being blocked when suck the leaves (Fig. H)
3. Align the blower tube lower with the grooves on the
blower tube upper. Push the blower tube lower onto
the blower tube upper until it locates in the right posi-
tion (Fig. J)
4. Unload the Impeller Guard (Fig. K1/K2/K3)
5. Align the blower tube with the mark “Δ”, insert the
blower tube to the housing, and revolve the blower
tube about 90 degree according to the fig. L2, the
hook should be locked according to the pic. L3
6. Put the bag hook on the cable cleat of blower tube,
and insert the bag to the housing (Fig. M1/M2)
OPERATION
Use the device only for applications described in the sec-
tion Operating Range.
Attention! Thrown-about objects may cause seri-
ous injuries of the operator or other persons.
Always wear eye and ear protectors as well as
a proper working dress. Spectators must keep a
distance of at least 5m.
On/off switch
1. Connect the power and move the power off/on switch
to the ON position (Fig. N).
Direct the suction tube toward tree leaves and suck them
in (Fig. P).
Stopping the Vacuum- Blower
To turn off the machine you can simply release the switch.
MAINTENANCE
Apart from keeping the vacuum blower clean and un-
blocked, there are no user maintenance procedures to
be carried out. Refer to qualified service personnel if any
repairs are required.
CLEANING
- Take debris bag down and clear leaves in joints of
debris bag by using the brush (Fig. Q)
- Move the zipper and pour grass out (Fig. R1)
- Don‘t empty debris bag with hands - risk of injury (Fig.
R2).
- Take the Impeller Guard down and clear leaves in the
Impeller by using the brush (Fig. S1).
- Use the brush to clear leaves in the mouth of blower
tube (Fig. S2)
- Clear the surface of housing (Fig. S4)
Power Cord Maintenance
If the supply cord needs replacing, the task must be car-
ried out by the manufacturer, the manufacturer’s agent,
or an authorised service centre in order to avoid a safety
hazard.
Troubleshooting
Attention! Always remove the plug from the mains
socket before starting any work on the machine.
• The machine won’t start: Check whether the switch
is in the “ON” position; check that the residual current
circuit breaker is not switched off and that no fuses
have blown in its electric circuit. If the machine still
won’t start have it inspected by an authorised cus-
tomer service firm.
•
The machine won’t vacuum:
Check whether the
leaf collection bag is full, otherwise have the machine
inspected by an authorised customer service firm.
• The machine won’t blow: Have the machine in-
spected by an authorised customer service firm.
GB-7