FlexoTrim LSN 2600 E, Operating Instructions Manual

Page: 20 / 84

GB-4
• Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
• Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of
children and do not allow persons Unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use, Many accidents
are caused by poorly maintained power tools.
• Use the power tool, accessories and tool
bits etc., in accordance with these instruc-
tions and in the manner intended for the
particular type of power tool, taking into ac-
count the working conditions and the work
to be performed. Use of the power tool for
operations different from intended could result
in a hazardous situation.
Service
•
Have your power tool serviced by a quali-
fied repair personnel using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional safety rules for blower vacs
• Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes,
hands, feet, head or hearing ,Use safety glass-
es or a face shield, high boots or sturdy shoes,
long trousers, work gloves, a hard hat and ear
defenders.
• Do not start the tool when it is upside down or
when it is not in the operating position
• Switch the motor off and remove the plug when
the tool is not being used, left unattended, be-
ing cleaned, being moved from one place to
another or when the extension cord is entangled
or damaged.
• Do not operate the tool near people, especially
children or pets. Turn it off if they get too close.
Maintain a safe distance of at least 5m from
other people when using the tool.
• Never direct the blower tube towards bystand-
ers or pets. Never blow debris in the direction of
bystanders or pets. The operator is responsible
for accidents or hazards occurring to other peo-
ple or their property.
• Do not handle the plug or the tool with wet
hands and do not use the tool in the rain.
• Use only outdoor rated extension leads that are
so marked. Keep the extension cord away from
heat, oil and sharp edges.
• Ensure that the extension lead is secured in a
manner that prevents it form disconnecting from
the plug whilst in use.
• Keep all the air intakes and the blower tube free
of dust, lint, hair and other material that may
cause a reduction in air flow.
• Keep a balanced and stable stance while using
the tool.
• Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflam -
mable and /or explosive substance such as
liquids, gases and powders.
• Do not get distracted and always concentrate
on what you are doing. Use common sense.
Never operate the tool when you are tired, sick
or under the influence of alcohol or other drugs.
• Do not operate this appliance with long loose
hair or loose fitting jewellery. Tie long loose hair
back and remove loose fitting jewellery.
• Do not allow the blower vac to pick up any burn-
ing or smoldering materials like ashes, cigarette
butts etc.
• Do not attempt to pick up breakable objects like
glass, plastics,china etc.
• Do not use in vacuum operation without the col-
lection bag fitted
• Do not use the blower vac in either the vacuum
or the blower position on gravel surfaces.
• Only operate the tool during broad daylight or
with adequate artificial light.
• When the tool is not in use, store it in a dry place
and out of reach of children.
• After use, disconnect the tool from the power
supply and check for damage. If you have the
slightest doubts, contract an authorized service
centre.
• Only use the tool according to the instructions
given in this manual.
• Check regularly that screws are tight.
• Use only spare parts and accessories recom-
mended by the manufacture.
• Do not try to repair the tool or access internal
parts. Contract authorized service centers only.
• This product is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience