background image

 

16 

 

H. Kamerlingh Onnesweg 2 

2408 AW Alphen aan den Rijn 

The Netherlands 

 

 

CONFIDENTIAL   -   THIS DOCUMENT MAY NOT BE DISCLOSED TO ANY THIRD PARTY OR USED FOR ANY 
OTHER PURPOSE WITHOUT THE EXPRESS WRITTEN PERMISSION OF AV FLEXOLOGIC BV
 

CONFIDENTIAL 

 

 

 

 

 

Every time a MOM file is imported a new job is created. Not all fields in the imported job may be filled in 
correctly. The fields which are not present in the MOM file will be filled in with the default values.  
These default values are the same as when a new job is created manually. 

If these default values are not the correct values for this job, they need to be changed before you can start 
mounting. The values which might need changing after import are: 

Field name 

Description 

Cylinder width 

With of the to be used cylinder/sleeve 

Cylinder repeat 

The repeat of cylinder /sleeve including buildup 

Tolerance 

The accepted mounting tolerance 

Check tolerance 

The accepted check tolerance for OK or NOK  

Press overshoot 

Additional press distance to press down the entire cliché 

Plate data 

Name of plate type selected 

Tape data 

Name of tape type selected 

Remarks 

Will indicate this was an imported job 

 

19.

 

External job creation 

Besides the usage of plug-in software, it is possible to have an additional PC dedicated for entering jobs. 
This PC is also known as the Offline Filling Database (OFD). 

While entering jobs manually into the FAMM with the OFD, the FAMM can still mount simultaneously. 
Both computers are connected via a network cable and share the database containing the jobs.  
The OFD computer is dedicated for creating jobs and cannot control the FAMM. 

There are 2 different ways to implement this system: 

Option 1 

The image below shows the so-called ‘stand-alone’ solution. 

The FAMM is connected to the OFD using a cross-link Ethernet cable. 

Jobs are stored on 1 of the computers, preferably the FAMM computer, and the other computer has access 
through the Ethernet connection. The computer which holds the jobs must be switched on for the other 
computer to reach them. This is why it is preferred to locate the jobs on the FAMM computer. 

 

As in MOM file 

After ‘hor. and vert. mirror’ 

Summary of Contents for FAMM


















Reviews: