Flexco Novitool Ply 130, Safety And Operation Manual, Page: 5 / 44

—5—
General Safety Rules–Save These Instructions–
Signal words:
“DANGER” indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury. The signal word is
limited to the most extreme situations.
“WARNING” indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against unsafe practices.
Safety Symbol
!
This international safety symbol is used to
identify and call attention to specific
safety matters.
Safety Information
To Avoid Severe Personal Injury or Property
Damage, read carefully and understand the
following Safety Precautions.
1. WORK AREA
!
CAUTION
Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
!
DANGER
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
!
CAUTION
Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause
you to lose control.
!
WARNING
Never leave tool until it comes to a complete stop.
!
WARNING
Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained users.
!
CAUTION
Environmental Operating and Storage
Conditions
Operating Conditions
Ambient temperature 5°C (41°F) to 40°C
(104°F)
Non-condensing humidity
Indoor use only
Storage and Transportation Conditions
Ambient temperature -25°C (-13°F) to 55°C
(131°F)
Non-condensing humidity
2. ELECTRICAL SAFETY
!
DANGER
The Ply Separator is a single insulated tool and
needs a multiple wire grounded power cord and
grounded power supply system. The machine
is provided with an electrical plug to ensure
connection to the proper supply power.
!
WARNING
Avoid body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock.
!
WARNING
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock and will damage
the tool.