Flexco Novitool Ply 130, Safety And Operation Manual, Page: 15 / 44

—15—
C
Ply Separation Process
Prior to splitting ensure:
• The Ply 130™ is mounted properly (see instructions for work bench or cart installation).
• That the three casters of the Ply 130 cart are locked (when using the cart).
• To prepare for a splice, the material is separated between the
belt plies. The depth of separation should be determined by the
operator since it will depend on belt material, number of plies
and splice type.
Under infeed table, loosen
clamp nuts to release adjustable
guide and move to set to
desired splitting depth. Depth
adjustment is in increments
of 5 mm. Lock the adjustable
guide by tightening the clamp
nuts underneath the infeed
table.
B1
C1