Flex TRINOXFLEX BME 18.0-EC + BF 140, Original Operating Instructions

Page: 33 / 514

TRINOXFLEX BME 18.0-EC + LK 152 / + BR 50 / + BF 140 / + BS 50
33
Mounting attachments

Place the required attachment on a level
work surface with the quick-release cou
-
pling facing upwards.

Place the drive unit in the required position
for the attachment and press down until it
engages audibly (1.).

Close the clamping lever (2.).

Open the clamping lever on the attach
-
ment (1.).

Place the drive unit in the required position
for the attachment and press down until it
engages audibly (2.).

Close the clamping lever (3.).
NOTE
If the attachment does not audibly engages,
move the spindle or drive pully of the tool a
bit, so that the coupling can interlock.

Loosen the locking screw (1.).

Place the drive unit on the quick-release
coupling (2.).

Re-tighten the locking screw (3.).
Removal of attachments