SPR 18.0
17
Selecting the operating mode
Briefly press the
MODE
button for
selecting the operating mode until the
desired mode is displayed.
The following operating modes are
available:
– Playback of music sources connected via
Bluetooth®
– Playback of music sources connected via
cable
AUX
– Radio reception
FM
– Radio reception
AM
The selection is shown by means of the
corresponding symbol on the left in the
display.
Playback of music sources
connected via Bluetooth®
Set the operating mode with the
MODE
button for selecting the operating mode.
The symbol flashes.
Activate the Bluetooth® function of the
device to be connected (mobile phone or
similar) and select "FLEX SPR 18.0" as
the target of the Bluetooth® connection.
For this purpose, follow the instructions
in the device operating manual (mobile
phone or similar).
NOTE
If a password is required, use "0000".
When the connection is made, the
symbol lights up continuously.
The playback of the data from the
external source can be controlled via the
Bluetooth® speaker:
– Briefly press the Playback/Pause
button to start or interrupt the
playback (1.).
– Briefly press the
¶
or
·
button to jump
to the previous or following track (2.).
– To increase the volume, press the
VOL+
button.
– To reduce the volume, press the
VOL-
button.
To separate the Bluetooth® connection,
press the Playback/Pause button and
hold until the symbol flashes.
The connection is separated.
Playback of music sources
connected via cable
Set the
AUX
operating mode with the
MODE
button for selecting the operating
mode.
To protect the device, push the external
device under the elastic retaining
strap (1.).
Release the AUX connector from the
holder and connect with the external
music source (MP3 player or similar) (2.).
Switch on the external music source and
start the playback.
439.525_BT-Speaker.book Seite 17 Mittwoch, 13. Januar 2016 10:58 10
