6
MAIN WING INSTALLATION
Required Tools and Fasteners: #1 Phillips Screwdriver, (2) M2.5x10mm self-tapping screws
1. Remove the belly hatch by peeling back the tape at the rear of the hatch.
2. Install the wing tube into the fuselage.
3. Slide the left or right wing panel on the wing tube and guide the servo wire into the fuselage.
4. Invert the airplane so that the belly is facing up. Secure the wing to the fuselage with (1) M2.5x10mm self-tapping screw.
5. Slide the wing tube into the installed wing panel until it bottoms out. DO NOT FORCE THE TUBE INTO THE WING.
6. Slide the other wing panel guiding the servo wire into the fuselage.
7. Secure the wing to the fuselage with (1) M2.5x10mm self-tapping screw.
8. Use a small piece of music wire with tip hook shape to fish the aileron servo lead thought the hole as shown in picture below.
NOTE- Take special caution to prevent the aileron servo extension from being pinched when installing the wing panels.
Summary of Contents for QQ Extra 300
Page 1: ......
