11
PROPELLER/SPINNER INSTALLATION
Required Tools and Fasteners: #1 Phillips Screwdriver, 13mm Box Wrench, M3x6mm machine screw
1. Insert the prop collet onto the motor shaft. Ensure that it is fully seated.
2. Temporarily remove the prop nut and washer and install the propeller with the convex surface facing forward. The propeller size numbers
are printed on the front face of the prop and should orient forward.
3. Slide the prop washer on the collet with the widest face aft, and tighten the prop nut.
NOTICE
Because the spinner does not have a backplate, spin the motor over by hand to ensure that the spinner is true after installation.
SFG INSTALLATION
1. Liberally apply medium CA (cyanoacrylate adhesive) to the airfoil-shaped mounting plate on the inside of the SFG.
2. Insert the SFG into the molded cavity in the wingtip and press tightly. NOTE- the plastic skid is on the BOTTOM of the SFG.
Summary of Contents for QQ Extra 300
Page 1: ......
