LD 15-10 125 R / LD 15-10 125
20
Adjusting the handle
Loosen rotary knob for adjusting the handle
by turning it approx. 2 revolutions anti-
clockwise.
Place handle in the required position
(15° notch).
Ensure that handle engages correctly!
Tighten rotary knob for adjusting the handle
clockwise.
klqb
fÑ=êÉèìáêÉÇI=íÜÉ=Ü~åÇäÉ=Å~å=ÄÉ=ãçîÉÇ=
íç=íÜÉ=çíÜÉê=ëáÇÉ=çÑ=íÜÉ=ÉäÉÅíêáÅ=éçïÉê=íççäK
Adjusting the guard
(LD 15-10 125 R)
klqb
The brush ring should protrude over the sanding
pad by approx. 0–1 mm. To compensate for
wear on the diamond sanding pad, the height
of the guard can be adjusted.
Loosen clamping lever on guard hood.
Set the guard hood to the required height.
Tighten the clamping lever.
Switching the electric power tool
on and off
Brief operation without engaged switch
rocker:
Push the switch rocker forwards and hold
in position.
To switch off the power tool, release the
switch rocker.
