Flex CS 62 18.0-EC, Original Operating Instructions, Page: 15 / 316

CS 62 18.0-EC
15
Contents
Symbols used in this manual . . . . . . . . . 15
Symbols on the power tool. . . . . . . . . . . 15
For your safety . . . . . . . . . . . . . . . . . . . . 15
Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Instructions for use. . . . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 25
Disposal information. . . . . . . . . . . . . . . . 26
-Declaration of Conformity. . . . . . . . . 26
Exemption from liability . . . . . . . . . . . . . 26
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 26)!
For your safety
WARNING!
Before using the power tool, please read
and follow:
- these operating instructions,
- the “General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet
-
no.: 315.915),
- the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with
the acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
- The power tool may be operated only if it
is as intended,
- in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The plunge saw CS 62 18.0-EC is designed
Ó
for commercial use in industry and trade,
Ó
for lengthwise and cross cuts with
a straight cutting path,
Ó
for cutting solid wood and board
materials such as chipboard and wood-
core plywood and MDF boards up to
a maximum thickness of 62 mm,
Ó
for use with circular saw blades which
FLEX offers for this machine.
Not permitted are
Ó
the use of HSS saw blades and cutting-
off wheels,
Ó
stationary use as a circular bench saw,
Ó
use outdoors in the rain,
Ó
use in potentially explosive areas.