SERVICING THE POWER SYSTEM
24
Required Tools and Fasteners:
#1 Phillips Screwdriver
M3 Hex Driver
1. Remove the access hatch, tail pipe, and exhaust nozzle as descriped on
page 10
of this manual.
Unplug the 3-motor wires from the ESC.
Using #1 Phillips screwdriver remove the M3x6 phillips washer head sheet metal screws that secure the EDF fan unit to the EDF
mounting rails.
Using #1 Phillips screwdriver remove the M3x6 phillips machine screw that secures the rotor cone to the rotor.
Using an adjustable wrench, remove the M8 nut off of the motor adapter. Slide the motor adapter off of the motor shaft.
Using a M3 hex driver remove the (4) M3x6 that secure the motor to the EDF housing.
To remove the ESC, disconnect the ESC from the receiver or the Aura 8, and remove any cable ties holding the ESC to the fuselage.
2.
3.
4.
5.
6.
7.
