VENTRAL FIN INSTALLATION
Test fit the Ventral fin to the fuselage.
Please note, the ventral fins are asymetrical and will only fit properly in one direction
.
Mix and apply an appropriate amount of 5-min epoxy to fuselage and ventral fin. Place the ventral fin onto the Fuselage.
Avoid
applying glue to the EDF access hatch area.
Using a paper towel and Isopropyl alcohol, wipe away any excess epoxy.
1.
2.
16
Required Tools and Fasteners:
5-min Epoxy or Medium CA
MISSILE RAIL INSTALLATION
Required Tools and Fasteners:
5-min Epoxy or Medium CA
1.
2.
3.
Test fit the missile rails to the wings.
Please note, the missile rails are asymetrical and will only fit properly in one direction
.
Mix and apply an appropriate amount of 5-min epoxy to the missile rail and wing. Place the missile rail onto the wing.
Avoid using too
much glue as isopropyl alcohol will mar the paint of the FlexJet.
