FLENDER SECUREX T 3950de, Assembly And Operating Instructions Manual

Page: 8 / 32

Introduction
1.3 Intended use
8
Assembly and operating instructions 3950de
Edition 05/2022
ISO ANSI Warning
--- Warning – corrosive substances
--- Warning – suspended load
--- Warning – hand injuries
ATEX certification
Explanation regarding Machinery Directive 2006/42/EG
The torque limiter described here are “components” in accordance with the Machinery
Directive and do not require a declaration of incorporation.
Working on the torque limiter
Only carry out work on the torque limiter when it is not in operation and is not under load.
Secure the drive unit against being switched on accidentally. Attach a notice to the switch
stating clearly that work is being carried out on the torque limiter. Ensure that the entire
unit is not under load.
1.3 Intended use
Only use the torque limiter according to the conditions specified in the service and delivery
contract and the technical data in the annex. Deviating operating conditions are considered
improper use. The user or owner of the machine or plant is solely liable for any resulting
damage. When using the torque limiter please specifically observe the following:
•
Do not make any modifications to the torque limiter that go beyond the permissible
machining described in these instructions. This also applies to touch protection facilities.
•
Only use original spare parts from Flender. Flender only accepts liability for original
spare parts from Flender. Other spare parts are not tested and approved by Flender.
Non-approved spare parts may possibly change the design characteristics of the torque
limiter and thus impact active and/or passive safety. Flender will accept no liability or
warranty whatsoever for damage occurring as a result of the use of non-approved
spare parts. The same applies to any accessories that were not supplied by Flender.
•
Do not use the torque limiter in potentially explosive atmospheres.
•
If you have any queries, please contact our customer service (see Service and support
(Page 23)).