FLENDER SECUREX T 3950de, Assembly And Operating Instructions Manual

Page: 27 / 32

Assembly and operating instructions 3950de 27
Edition 05/2022
9 Spare parts
9
Flender torque limiters are packaged and stored as an assembly and are only available as
such. Ordering individual components is therefore not possible.
9.1 Ordering spare parts
To ensure the operativity of the torque limiter, stock important spare parts at the
installation site.
Note
Original spare parts
Only use original spare parts from Flender. Flender only accepts liability for original spare
parts from Flender.
Other spare parts are not tested and approved by Flender. Non-approved spare parts may
possibly change the design characteristics of the torque limiter and thus impact active and/or
passive safety.
Flender will accept no liability or warranty whatsoever for damage occurring as a result of the
use of non-approved spare parts. The same applies to any accessories that were not supplied
by Flender.
You can find the available spare parts for the torque limiter described here at Spare parts
list (page 28).
You will find our contact data for ordering spare parts in Service and support (page 23).
Information required when ordering spare parts
•
Flender order number with item
• Type and size of the torque limiter
• Part number (see Spare parts list (page 28))
• Quantity