6-General Safety Practices
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance.
The machine has to be delivered to the operator in perfect conditions of use by
the Distributor to the user. The user shall operate the machine only after being well
acquainted with the safety procedures described in the present manual. READ THIS
MANUAL WITH ATTENTION.
Basic Operation Practices
Dangerous parts
Some parts of the electric devices are connected to high voltage points.
These parts when touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buttons, switches and knobs with wet hands, wet
clothes and/or shoes. By not following these instructions operator could be exposed to
severe electrical shocks or even to a fatal situation.
Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make
sure the Switch is easy to be reached when necessary. Before any kind of maintenance,
physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure
the command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be given
for each operation step. Every step of the operation shall be taken only if the sign has
been made and responded.
Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components
of the machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the machine. If any
label has been removed or is no longer legible, contact your nearest dealer for
replacement.
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS section is not applicable to
your product, please disregard it.
04
5- OPERATION
1.Make sure the equipment is properly installed.
2.Attach accessory suitable for mixing needs to mixing shaft 6.
Note: Be careful not ot scratch or damage the mixing bowl 8
when assembling accessories.
3.Secure the bowl using the bowl locks 11 on both sides of
bowl.
4.Pour contents into mixing bowl 8.
5.Turn bowl lever 13 clockwise into locked position.
Double check that all steps have been completed
6.Close safety guard 7.
7.Turn speed switch to suggested speed for intended use 3
Note: For safety purposes, stop unit before changing speeds.
8.Make sure stop button 1 is released.
9.Plug in power cord 10.
10.Press start button 2.
11.Before checking contents, pres stop button 1.
12.Open safety guard 7 to check contents.
Note: A safety feature will turn off the machine if it is
overloaded. If this occurs please wait a few minutes.
13.This unit can work in the #12 mincer attachment. If the user
want it, please point out especially, and pay for it.
Summary of Contents for M30Al
Page 2: ......
