AIS Station
On the bottom of the
AIS receiver,
you will find a red and green LED light.
The red LED
(POWER) shows that the device is on. If no red light appears, recheck the
power connection cable.
The green LED
(DATA) blinks from time to time when it receives AIS data. If the green LED
does not blink irregularly, check the antenna and the cable connections again.
Its indicate that we receive no AIS data.
On the front side of the Serial-to-IP-converter you will find
5 LED
lights:
Checking The Devices
POWER
READY
SERIAL Rx/tx
LINK
ACT
constant red = ON
If it does not light up, check power connection
The LED only lights when the red data/consol button on the bottom of
the device is point on data and is only needed for programing the device
blink green = wait for network connection
constant green, ready for programming
The green LED blinks at the same time as the green data LED on the
AIS receiver
If it does not blink, but the AIS receiver
blinks, please check the serial cable between AIS receiver and IP converter
constant green = network cable is connected
If it does not light up, check network connection or change network cable
Blinking orange = network connection works and is ready to send data
If it does not light up, check network connection or change cable
Summary of Contents for AIS Station
Page 1: ...AIS Station AIS Station...
