background image

AIS Station

Are you sending Fleetmon any AIS data?

In exchange for your station, FleetMon has upgraded you to the AIS partner status and 

connected your station to your profile. At 

www.fleetmon.com

, you can login to your 

account and can monitor your stats for the station.

Log in trough your account at 

www.fleetmon.com

 and go to „

My AIS Stations

“. Now 

you can see different stats for the AIS station. If there is no station connected to your pro-

file, please Contact FleetMon support: s

[email protected]

.

A key stat is the „one day“ statistic where you can see when FleetMon actually receives 

the data. There is a short delay between receiving the data and the display in the stats, 

so you may have to wait a few minutes.

If you still do not see any statistics, please check the internet connection and the network 

cable. Diconnect the power supply from the Serial-to-IP-converter, wait for 

20 seconds 

and connect it again.

The serial-to-IP-coverter sends the AIS data via TCP to our IP address 

148.251.96.197

and your individual port number. Please make sure that you dont have any restrictions in 

your firewall.

Please check the statics again. If you cannot solve the problem, please contact Fleetmon 

support: 

[email protected]

.

Checking The Station

Summary of Contents for AIS Station









Reviews: