FlavioNet FV-5, User Manual

Page: 14 / 42

14
W
ELCOME TO
C
AMERA
FV-5
W
ILLKOMMEN BEI
C
AMERA
FV-5
B
IENVENIDO A
C
ÁMARA
FV-5
ようこそ
C
AMERA
FV-5
へ
C
am
era
FV-5
avoiding the blur caused by the finger moving
the camera when activating the shutter button.

Image stabilization. Activates or deactivates the image
stabilization. On most devices, this is digital image
stabilization. If image stabilization is not supported on
the device this button might not be present.

Burst mode. Activates or deactivates the burst mode.
When the burst mode is active, tapping and holding
the virtual shutter button or the shutter key (if the
device has one) will result in a continuous flow of
photos being taken, as long as the virtual shutter
button or the shutter key are not released.
Flash mode. Lets you choose the flash mode. Depending of the type
of the flash unit and the device, the available options are:

Automatic. The flash is fired if the camera considers
the lighting conditions require additional illumination.

Always on. The flash is always fired regardless of
lighting conditions.

Always off. The flash is never fired even if the scene is
poorly lit.

Slow sync. The flash is fired in slow sync mode. In slow
sync mode, the exposure time is adjusted as if the
flash wasn’t going to be fired. This captures extra light
from the background of the subject while the flash is
used to freeze the main subject.

Red eye. The camera fires the flash twice. The first
time (the pre-flash) uses a low power discharge to
cause the iris of the eyes present on the photo to
close, minimizing the effect of red eyes when the main,
full-power flash fires and the camera captures the
photo.

Red eye fix. The flash fires as usual but the camera
removes red eyes from the picture digitally (locating
them and replacing the color with black).

Continuous. If the flash is of LED type, the flash is
permanently turned on, allowing you to preview the
effect of the flash on the final photo while you frame it.
This option is not available if the flash is of xenon type.
If the device lacks a flash unit, the flash mode button will be hidden.
Settings button