5.6 REPLACING THE BATTERIES - REMOTE CONTROL MODELS
a)
Remove the ashpan cover
b)
The battery pack is located on the right hand side side of the burner unit at
the bottom.
c)
Carefully remove the pack and remove the batteries.
d)
Replace in the reverse order using 6 off 1.5V AA Alkaline Battery.
It is
important that only an alkaline battery is used, otherwise premature
battery failure and leakage may result.
5.7 REPLACING THE BATTERY - SLIDE CONTROL MODELS
a)
Remove the ashpan cover
b)
The battery holder is located on the right hand side side of the burner unit at
the bottom.
c)
Unscrew the retaining cap, remove and replace the battery then replace the
retaining cap.
5.8 SPILLAGE MONITORING SYSTEM
All models regardless of control type are fitted with a spillage monitoring system
which shuts down the fire if the evacuation of combustion products from the fire is
affected by a partially or fully blocked flue. If this system operates the fire will go
out. If this occurs, leave the fire for at least three minutes then follow the lighting
procedure as described in the previous section.
In the event of repeated
operation a GAS SAFE registered gas engineer must be called to investigate
and rectify the cause.
46