SECTION 2
INSTALLATION OF FIRE
2.1
UNPACKING THE FIRE
Carefully lift the fire out of the carton. Remove the loose item packaging carefully
from the front of the appliance. Check the contents as listed :-
Packing Check List
1 off
Fire box / burner assembly
1 off
Boxed ceramic base, front ceramic rail and 20 coals (18 large, 2 small)
1 off
Trim
1 off
Fender and ashpan cover (boxed)
1 off
Loose items bag, which includes (where applicable) :-
1 off
Remote control handset (RC models only)
1 off
Restrictor baffle (all models)
1 off
Cable fixing kit (all models)
1 off
Installation & user instruction book (all models)
1 off
Battery pack (RC models only)
1 off
45mm grommet (all models)
6 off
1.5V batteries (RC models only)
1 off
9V battery (RC models only)
1 off
1.5V battery (SC models only)
1 off
Guarantee card (all models)
2.2
INSTALLING THE FIRE BOX
Establish which type of flue you are intending to install the fire in to :-
225 x 225mm (9 inch x 9 inch) brick built chimneys of 3 metre minimum
effective flue height.
175mm (7 inch) diameter lined brick or stone flue, insulated pre-fabricated
metal flue box to BS 715 / BS EN 1856-2 of 3 metre minimum effective flue
height.
When installing into 125mm (5 inch) diameter lined brick or stone flue, or
insulated pre-fabricated metal flue box to BS 715 / BS EN 1856-2 the
restrictor baffle must not be fitted.
A spillage test must always be carried out to check satisfactory
clearance of flue products, regardless of the type of flue the
appliance is being fitted to.
10