![Flavel RENOIR RC Installation, Maintenance & User Instructions Download Page 50](http://html1.mh-extra.com/html/flavel/renoir-rc/renoir-rc_installation-maintenance-and-user-instructions_2303362050.webp)
5.8
REMOVAL & RE-ASSEMBLY OF THE FUELBED
5.8.1
Fit the fuelbed base into the combustion chamber as shown below in
figure 14. Ensure that the slot in the fuel-bed is located onto the lip on
the fuel-bed base support.
Fig. 14
5.8.2
Fit coal “A” onto the fuelbed base in the position as shown below in
figure 15. The coal form has the individual placement letters stamped
on the bottom face.
Fig. 15
50
Coal Form “A”
NOTE : The position of the fuel-bed components are critical to the
performance of the product. Therefore please ensure that the fuel-bed
components are positioned as described in the following section prior to
requesting a service call due to soot build up, poor flame pattern etc.
Locating Lip on
Fuel-bed Support
Section View of
Fuel-bed Base / Burner