2.9
FITTING THE TERMINAL GUARD
With the flue terminal in position, place the terminal guard over the top of the flue
terminal and mark the position of the holes on the outer wall. Remove the terminal
guard and drill the 4 off 6 mm holes. Insert the raw plugs into the drilled holes,
replace the terminal guard over the top of the flue terminal and attach to the wall
using the No.12 x 40mm screws provided with the terminal guard. See Fig. 14
below.
Fig. 14
2.10
REMOVING & REFITTING OF THE GLASS FRAME.
Fig. 15
16
Top Infill Panel
4 x 6mm Allen Bolts
