Warning : Use only the coals supplied with the fire. When replacing the
coals remove the old coals and discard them. Fit a complete set of
coals of the correct type. Do not fit additional coals or any coals
other than a genuine replacement set.
To ensure that the release of fibres from these R.C.F (Refractory Ceramic
Fibre) articles is kept to a minimum, during installation and servicing we
recommend that you use a HEPA filtered vacuum to remove any dust
accumulated in and around the appliance before and after working on the
appliance. When replacing these articles we recommend that the replaced
items are not broken up, but are sealed within heavy duty polythene bags,
clearly labelled as “RCF waste”. RCF waste is classed as a “stable”, non
reactive hazardous waste and may be disposed of at a landfill licensed to
accept such waste Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.
h.) Replace the glass panel and retaining trims as described on
pages 11 & 12
NEVER USE THE FIRE WITHOUT THE GLASS PANEL IN POSITION, OR IF
BROKEN OR CRACKED.
6.5
CLEANING THE FIRE - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool. The chrome effect Expression fascia supplied with the fire should only
also be cleaned with a clean, damp cloth.
The fascia is best cleaned in position on the fire when the appliance is not running
and is cool. Black painted metal parts should be gently cleaned with a damp cloth.
6.6
CLEANING THE FUEL-BED / GLASS PANEL
We do not recommend cleaning of the coals or fuelbed components as these are
fragile and damage may result.
None of these parts must be washed or
exposed to any cleaning agents or water
. Any damaged parts must be
replaced by contacting your dealer or telephoning BFM Europe Ltd. on the number
stated on the rear cover of this book. The coals must only be replaced with a
complete and genuine replacement set and the fire must never be run with the
wrong number or damaged coals. The fuel-bed must be carefully re-assembled as
stated in section 6.4
To clean the glass panel, please remove it from the product as described in pages
10-11. Use a clean damp cloth and ceramic glass cleaner to remove any stains or
deposits frm the glass panel. Do not using scouring pads as this may scratch the
surface finish of the glass panel.
40
