3.3
FIXING THE INFRARED SENSOR IN POSITION
a)
The infrared eye as shown below in figure 27 is supplied on a flying
lead, the self adhesive pad should be used to secure the infrared eye to
the Expression fascia as shown in figure 28, the handset will require
line of sight to the infrared eye to ensure correct operation.
Fig. 27
b)
Remove the backing paper from the self adhesive pad and position the
infrared eye in the air channels in the bottom of the fascia, so that the
infrared eye is flush with the front edge of the fascia, as shown
below in figure 28. Check the operation of the handset, as detailed in
section 3.3 and adjust the position of the infrared eye if necessary.
Fig. 28
25
Infrared Eye
Flying Lead
Infrared Eye Sensor
Self Adhesive Pad
Final position of
infrared eye
