7
Flash Mode: TTL Autoflash
This flash has three flash modes: TTL, Manual (M), and Multi
(Stroboscopic). In TTL mode, the camera and the flash will
work together to calculate the correct exposure for the subject
and the background. In this mode, multiple TTL functions are
available: Flash Exposure Compensation (FEC), High Speed Sync
(HSS), and second curtain sync.
* Press <MODE> Mode Selection Button and three flash modes
will display on the LCD panel one by one in sequence, with each
pressing.
TTL Mode
Press <MODE> Mode Selection Button to enter TTL mode. The
LCD panel will display <TTL>.
•
Press the camera release button halfway to focus. The
aperture and effective flash range will be displayed in the
viewfinder.
•
When the shutter button is fully pressed, the flash will fire a
pre-flash that the camera will use to calculate exposure and
flash output the instant before the photo is taken.
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd
stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the environment.
Setting FEC:
Disabling Auto Power Off function is
recommended when the flash is used off camera.
See the Custom Function Menu section.
Slave Auto Power Off Timer is set to 60 minutes
by default. Another option “30 minutes” is
available. See the Custom Function Menu section.
Press Function Button 2
<
>
. The icon
<
>
and
flash exposure compensa-
tion amount will be high-
lighted on the LCD panel.
Press
< SET >
button again
to confirm the setting.
Set the flash exposure
compensation amount.
•
Turn the Select Dial to set
the amount.
•
“0.3”means 1/3 step,
“0.7”means 2/3 step.
•
To cancel the flash
exposure compensation,
set the amount to “+0”.
1
2
3