14
2
3
1
5. M: Wireless Flash Shooting with Manual Flash
Advanced multiple wireless shooting, using manual flash, can be
achieved by designating Groups. You can shoot with a different
flash output setting for each slave unit firing group. All of the
setting parameters are made on the master unit.
Setting the flash mode to
<M>
Press Function Button 4 < Gr
>
<
Gr
>
to choose groups.
Then, press Function Button
3 < MODE > to set the flash to
M mode.
Setting flash output
When choosing the state of
the group, press Function
Button 2
<
>
to set the
power output. Turn the Select
Dial to set the flash output of
the groups. Press the
<SET>
button to confirm.
Taking the picture
Each group fires at the set flash
ratio.
Setting
<Multi>
Stroboscopic Flash.
•
Press
<MODE>
button
so that
< MULTI>
is
displayed.
•
Setting the stroboscopic
flash.
6. Multi: Manual Wireless Flash Shooting
The flash can be set on wireless R2 radio transmission to advanced
wireless multi-flash stroboscopic lighting in the same way as
ordinary TTL auto flash shooting, using MULTI as the Mode option in
separate groups, as a master or slave.
All of the selection options are the same as in normal non-wireless
operation as previously described. Basic subject and light position
and operating range are the same, as long as the main control unit
is set to
<TTL>
for wireless automatic flash shooting.
1