11
Wireless Flash Shooting: R2 Radio (2.4G)
Transmission
•
You can set up three slave groups for TTL autoflash shooting.
With TTL autoflash, you can easily create various lighting
effects.
•
Any flash settings for the slave units on the master flash in
TTL/Manual/Multi mode will be automatically sent to the slave
units. So the only thing you need to do is to set the master
unit for each slave group without any operation for the slave
units at all during the shooting.
•
This flash can work in
TTL /M /Multi / OFF
flash modes when
set as a master unit.
As a slave unit, this Zoom TTL Speedlite for Olympus /
Panasonic is compatible with Flashpoint R2 series transmitters
for receiving the signal for triggering from R2T-C (for Canon),
R2T-N (for Nikon), R2T-S (for Sony), R2T-F (for Fuji), and R2T-O
(for Olympus or Panasonic) .
•
Even with multiple slave units, the master unit can control
all of them via wireless.
•
In this user manual, “master unit” refers to the camera
flash on a camera and “slave unit” will be controlled by the
master unit.
1. Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
Press
<
>
button so that
<
>
is displayed on the LCD panel.
If
<
MULTI>
is displayed, it means
Multi mode is ON.
The backlight now turns
green
.
1
2
Master Unit Setting
Maximum Stroboscopic Flashes: