Guider IIS series User Guide | www.flashforge.com
②
Turn
on your
Guider IIS
, level the build plate and load the filament.
③
Click [Print] and transfer your Gcode file to your
Guider IIS
. After
completing transference, the printer will heat up automatically. And when
heating finishes, the printer will start to build the model.
If you want to print a Gcode from a local folder, you just need to load the file
into FlashPrint at the status of USB connection or WiFi connection or Ethernet
connection, then click the [Print] button on the top-right.
●
Load the target Gcode file into Fl
ashPrint.
7-9